| Product Name | Disc Conical Spring Lock Washer |
| Place of Origin | China |
| Brand Name | Huilida |
| Standard | DIN6796,JIS1251,ASME 18.21.1 |
| Material | Carbon steel, stainless steel (A2, A4) Ect |
| Size | Produce according to the standard or drawings |
| Treatment | Zinc plated, Dacromet Dacr, Environmental zinc, galvanized |
| OEM Service | Accepted |
| Sample Delivery | Within 7 working days |
Conical Lock Washer DIN6796:
How Conical Lock Washer Works:
The Conical Lock Washer is tapered to press on the underside of the bolt head and into the mounting material. This increased tension has many benefits, including:
Vibration Control (Lock Washer)
Pre-Load
Increased Load
Increased Deflection
Spacing
Dampen/Absorb Shocks
Conical Lock Washer Installation
Installing Conical Lock Washer is very easy. There are only a few steps to consider:
1.Determine the project load capacity and deflection.
2.Decide which Spring Washer Stack will give you the optimal results.
3.Slide the washers onto a bolt in the optimal stack.
4.Slide the bolt through the installation material with the stack pressing against the installation material (remember the base washer must be facing down).
5.Tighten the bolt against the other side of the installation material.
We can produce according to the standard or drawings.
Contact us to get good price! Welcome to your inquiry. 
FAQ
Q. When can I get the price?
A: We usually quote within 24 hours after we got your inquiry. If you are very urgent to get the price, please call us or inform us in your email .
Q: How can I get the quotation?
A: Please send us information for quote: drawing, material, weight, quantity and request, we can accept PDF, ISGS, DWG, STEP file format. If you don't have drawing, please send the sample to us, we can quote based on your sample too .
Q. Do you accept the OEM?
A: OEM is welcome. We can custom the goods according to your design .
Q. What is the shipping?
A: By express(FedEx, UPS, DHL, TNT, EMS, etc...), By Air and By Sea .
Q. How do I pay for the order?
A: The common payments are T/T(Telegraphic Transfer), Western Union, Paypal .
Q. I have an idea for a new product, but don't know if it can be manufactured. Can you help?
A: Yes, it is our pleasure to work with potential customers to evaluate the technical feasibility of your idea or design, and we can advise on materials, tooling and so on .
Q: What about the leading time for mass production?
A: Honestly, it depends on the order quantity. Normally, 15 days to 20 days after receiving your deposit .
Q: How if the parts are not good?
A: We can guarantee good quality, but if happened, please contact us immediately and take pictures for us, we will check on the problem and solve it ASAP . 
